1 1

Forced Performance

FP Zero Ball Bearing for DSM

FP Zero Ball Bearing for DSM

$2,549.00 USD
$2,299.00 USD $2,549.00 USD
Sale Sold out

Product Details

 

DSM BB Zero

  • Compressor wheel - 86HTZ
  • Flow rating - 78LB per minute
  • CW Measurements - 62.1MM Inducer / 86.2MM Exducer
  • TW Measurements - 67.7MM Inducer / 62.2MM Exducer
  • Compressor Housing - 84MM Flow Advancement Port Cover
  • Turbine Housing - FP DSM 10CM Turbine Housing
  • CHRA - Xona Rotor Dual Ceramic Ball Bearing
  • Oil Line - Stock Oil Feed Line Compatible

After years of setting records in the Evo and Subaru communities, we are excited to offer the FP Zero for the DSM platform, for those of us who want the most performance possible from a stock location turbo. This turbo is only available as Wastegate on O2, as this size turbine wheel can not be used with an internal wastegate setup.

One note on the oil line fitment, a 1G DSM OEM oil hard line will work with this turbo, as it can be fed from the head and the inlet is a 12MM fitting. Alternatively, you can use an FP Evo IX BB feed from head oil supply line.

Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.

EPA WARNING: This is a RACE ONLY product manufactured and sold for installation on vehicles to beused solely for competition purposes, which, once installed, may never be used, or registered orlicensed for use upon a public road or highway. Higher Standards automotive performance LLC is notresponsible for the sale or misuse of products sold by us intended for competition use only. If you installthis part on your vehicle and use that vehicle on a public road or highway, you will be considered inviolation of the Clean Air Act and personally subject to a civil penalty of $4,454. Clean Air Act Title II Section 203 Code 7522(a)(3)(A) for any person to remove or render inoperative any device or element of design installed on or in amotor vehicle or motor vehicle engine in compliance with regulations under this subchapter prior to itssale and delivery to the ultimate purchaser, or for any person knowingly to remove or renderinoperative any such device or element of design after such sale and delivery to the ultimate purchaser;or(B) for any person to manufacture or sell, or offer to sell, or install, any part or component intended foruse with, or as part of, any motor vehicle or motor vehicle engine, where a principal effect of the part orcomponent is to bypass, defeat, or render inoperative any device or element of design installed on or ina motor vehicle or motor vehicle engine in compliance with regulations under this subchapter, andwhere the person knows or should know that such part or component is being offered for sale orinstalled for such use or put to such use; or .

View full details